Manual control does not use any form of obstacle detection and will move the Burro in any direction that you, as an operator, instruct the robot to go. Follow these steps to enable and use manual control effectively:

​
Enabling Remote Control

1

Enable Remote Control

Navigate to Settings > Remote Control and enable it.

2

Connect Remote

Connect the remote by flipping on the power switch to the top left and pressing the connect button.

3

Check Remote Connection

The screen should now give visual feedback of the remote being connected.

​
Testing the Remote

Test the remote by pressing the movement buttons and move the robot to the desired location using the remote.

Cortador generates sounds that exceed 85 dB. Continuous exposure to loud noises from the mower may lead to long-term hearing loss. Wear appropriate ear protection 🎧.

​
Operating the Mower

1

Turn Mower Blades On

Turn the mower blades on by holding down the ON button for 3 seconds.

2

Mow Area with Remote

Move the robot around using the movement buttons on the remote to mow the area precisely.

3

Turn Mower Off

Once complete, use the same menu under the Toolbox icon to turn the mower off.

4

Turn Breaker Off

Once you’re back at the base, turn the breaker switch to the off position to keep the mower safe to operate for the next time.