​
Battery Specifications

2 x 51.2V 100Ah Lithium Iron Phosphate (LFP) batteries

Alternative battery chemistries cannot be substituted without reconfiguring the robot.
For reconfiguration assistance, please contact support.

​
Charging Instructions

The BURRO Grande units are designed to charge via a standard three-prong plug. To charge, simply connect the plug to a standard 120V outlet using a typical extension cord. Each unit draws approximately 10-11 Amps at 120V during charging.

To avoid circuit overload, do not connect more than one BURRO Grande unit to a single circuit. In the U.S., a standard outlet is typically wired to a 15A circuit, and exceeding this capacity may cause the circuit breaker to trip, preventing the BURRO from charging.

​
Battery Storage Recommendations

If the batteries are to be stored, please disconnect them from the robot and store them in a cool, dry location with adequate ventilation. The recommended storage conditions are between 50-95°F (10-35°C) with approximately 50% humidity.

​
Maintenance During Storage:

  • Charging Frequency: Charge the batteries every 90 days to maintain optimal performance.
  • Alternative Option: You may keep the batteries connected to the robot and plugged into a power source when not in use, in which case no additional steps are necessary.

For any further questions or support, please do not hesitate to contact our customer service team.