Powering On/Off
Powering On
Before powering on your Burro, ensure it is properly charged and in good condition.
Locate the Red Power Switch
Find the red power switch on the side of the Burro.
Turn the Switch On
Turn the switch to the ON position (the top of the switch will show green).
Wait for Boot Up
Wait for approximately 5–10 seconds for the Burro to boot up. The main user interface (UI) should load automatically on the touch screen.
Troubleshooting
If the UI does not load, refer to the Troubleshooting section for guidance.
Turning Off
To safely power off your Burro, follow these steps:
Exit the UI
Tap the gear icon in the top-right corner of the screen. Select General from the menu, then tap Exit UI.
Shut down the system
On the Ubuntu desktop, click the tray icon in the top-right corner of the screen.
- Select Power Off/Log Out, then click Power Off.
Turn off power
Wait until the screen shows No Signal, then turn the red power switch to the OFF position.
Following these steps ensures your Burro powers off safely and is ready for its next use.